ESCO's Model G-50 Guillotine cut-off saw can be configured as a stationary model or as a flying cut-off to automatically cut pre-selected lengths from a continuous foam bun line. The traveling version of this saw utilizes a unique conveyor system which eliminates the need for gathering conveyors.
Blades - Blade Wheels
Blade thickness: 0.020" (0.5mm)
Width: 3/4"
Blade tension: Pneumatic
Blade type: Serrated saber tooth
Wheel diameter: 16” (406mm)
Tire surface – rubber
Ground and balanced
Bearings: sealed ball type
Material: aluminum.
Head Assembly
Minimum total cycle time at full stroke: 5.25 sec.
Head support: guided on ball bushings
Traverse: variable frequency AC drive
Bun Length (Traveling Version)
Indexing increments: 1"
Minimum length cut with high speed return: 15 FPM, 36" and 30 FPM, 72"
Power Requirement
1-1/2HP, 1750 RPM, 230/460 volt, 3 Phase, 60 Hertz
Optional Features
Blade sharpeners: Borazon wheels eliminate the need to dress grinding wheels. Driven via high-speed air motors to provide fast grinding with the ability to change bevels independently. Pneumatic actuators controlled by timers automatically pull in grinders for a set period of time on a programmed cycle.
Specifications
G-50
Cutting height
50" (1270mm)
Cutting width
92" (2337mm)
Optional height
60" (1524mm)
Floor Space Required:
Width
219" (5563mm)
Length
161" (4089mm)
Height (max)
104" (2642mm)
Shipping weight is approximately 5600lbs (2540kg).
