Stationary Cut-Off Saw (SF)

  • Stationary Cut-Off Saw (SF)

The ESCO Model SF is a bi-directional stationary saw used for cutting long polyurethane buns to a specified length. It is designed to be integrated into a conveyor line where the block is stopped and cut to length, then moved along by the following block.

Blade-Blade Guide -Wheels-Carriage Assembly
  • Powered by a 3/4 HP motor
  • Thickness of 0.02" (.5mm)
  • Width is 1/2" (12.7mm)
  • Serrated saber tooth blade
  • Teflon coated blade guide, quarter turned for straight passage through the foam.
  • Sealed ball type bearings, urethane tire surface
  • Blade carriage assembly has 1/2 HP motor through a chain drive, cutting in both directions. Maximum cutting speed up to 1 foot per second
  • Cut-off speed of 60 FPM, 18 m/min
  • Reverse gear head brake motor traverse

Bun Length

Indexing increments 4" (101.6mm)

Foam Supporting Conveyor

Conveyors can be quoted upon request.

Power Requirement

230/460 Volts, 3 Phase, 60 Hrtz

40-SF 50-SF 60-SF
Cutting height 40" (1016mm) 50" (1270mm) 60" (1524mm)
Cutting width to 90" (2286mm) to 90" (2286mm) to 90" (2286mm)
Cutting length 4 to 100' (1.2m to 30m) 4 to 100' (1.2m to 30m) 4 to 100' (1.2m to 30m)
Floor Space Required
Machine height 138" (3350mm) x 44" (1117mm)
108" (2743 mm) 120" (3048mm) 128" (3251mm)

Contact Us

For more information, please contact us :

Para Español :
616-453-5458 ext. 217

Fax :

Email :

contact us