ProfileMatic III image
Vertical Profilematic Machine image
Horizontal Slitter image
ECD Low Pressure Dispenser image
MOCA Melter image
M-100 Low Pressure Mix Head image
M-200 Low Pressure Mix Head image
Filler Fed Mix Head (FFH) image
Request Information


Fabrication Equipment Inventory



Horizontal ProfileMatic Contour Cutter


  • Great for cutting intricate designs in urethane foams both flexible and rigid as well as most grades of Ethafoam, Foamglas, mineral wool, EPS, and similar materials
  • Makes cutting pipe insulation sections easy

Horizontal ProfileMatic CNC Contour Cutter Specifications



Dual Head ProfileMatic Contour Cutter


  • Two sizes of machine to choose from
  • Great for cutting intricate designs in urethane foams both flexible and rigid as well as most grades of Ethafoam, Foamglas, mineral wool, EPS, and similar materials
  • Cuts contours both vertically and horizontally


Dual Head ProfileMatic CNC Contour Cutter Specifications



HT-51-88-PVT Horizontal Slitter


  • Fully loaded with vacuum table and airlift
  • High-tension (HT) head should be used for higher density materials such as rebonded foam, latex and visco-elastic flexible materials up to 6lb/ft3 (96kg/m3)

HT-51-88-PVT Horizontal Slitter Specifications




Dispensing Equipment Inventory



ECD Low Pressure Dispenser


A good solution when a simple, dynamic metering and dispensing solution is needed. This series offers an affordable yet effective means for the dynamic mixing of two component polyurethanes.





MBOCA Stand Alone Solid Curative Melter


Five gallon working capacity, non-painted stainless steel tank with inverted cone melter supported by a hot oil closed loop recirculation system with independent electronic controller which also supports the MOCA dispenser.

System is capable of Moca melt rate of 2.5 lbs./min. based on 9 KW using 280 degree F oil.

A regenerative blower and hosing is provided to vacuum transfer Moca pellets from fiber drum to melter with exhaust diverted back to fiber drum to minimize dust released. Blower is interfaced with melt tank level controls to maintain a minimum constant melt level to prevent heat degradation.

View our MOCA Melter and other Elastomers Overview



M-100 Low Pressure Mix Head


Our smallest dynamic mix head produced with external valving for recirculation. Utilized for gasketing applications.


M-100 Low Pressure Mix Head Specifications



 

M-200 Low Pressure Mix Head


Can handle up to three external recirculation valves at a flow rate up to 20 lb/min.

M-200 Low Pressure Mix Head Specifications



 

Filler Fed Mix Head (FFH)

Incorporate a wide range of solid fillers directly into multi-component liquid systems

Filler Fed Mix Head Specifications