F-24 Vertical Band Saw

The F-24 is a vertical band saw small enough to be used in a laboratory type environment yet robust enough for use as a production machine.

Table

• Manually operated
• Table manually traverses on steel tube rails
• Wood top - plastic coated
• Height from floor is 37" (940mm)
  

Fence Assembly

• Aluminum
• Manual adjustment
• Height from table is 5" (127mm) standard
• Sealed ball bearing mounted
• Guided by gear racks
• Lock shaft clamp type
• Locating - visual reading of rule mounted in table

Blades

• Blade thickness: 0.02" (0.5mm)
  Width: 3/8", 1/2", & 3/4"
  Speed: 2000 FPM (610 MPM)
  Type: Serrated saber tooth

Blade Wheels

• Wheel diameter 16 ” (406mm)
• Made of aluminum with rubber tire surface
• Ground and balanced with sealed aluminum ball bearings

Blade Guide

• Thickness .055" (1.4mm)
• Width 1-1/8" (28.6mm)
• Teflon coated
• Die spring tensioned
  

Controls and Power Requirements

Motor 0.75 HP, RPM 1750, 115 or 230 volt, 1 Phase, 60 Hertz

Safety Package

Includes guards, warning decals, blade break disconnect switch, disconnect switch on main panel, warning light when machine is in operation, 110 volt control circuit, and podium mounted emergency stop button.

Specifications